Ergotron Dual Monitor & Handle Kit

Ergotron

Desks & Furniture

Ergotron

 Features Convert a single-monitor mount so it holds two displays, or increase the size of compatible displays for your current dual-monitor solution.  A handle is included to make repositioning of the screens easy. Note: This kit is ideally suited to screens that are 23" or 24" in size. It can...
$176.00
-
+
$176.00
Add to wishlist
 Features
  • Convert a single-monitor mount so it holds two displays, or increase the size of compatible displays for your current dual-monitor solution.

  •  A handle is included to make repositioning of the screens easy.

    Note: This kit is ideally suited to screens that are 23" or 24" in size. It can also be used with many 22" or 26" displays. See specifications for details.*

  • Optimized for dual-mounting of 24" monitors
  • Attaches to wide variety of mounts using a 50 x 50 mm, 100 x 100 mm or 200 x 100 mm hole pattern
  • Robust design ensures many years of service
  • Conceal and organize cables: Display cables can be neatly routed behind displays
 Specifications
  • Includes bow, two mounting brackets, handle, mounting hardware
* Outside width of monitor should be 21" to 24.5" (53 to 62 cm). This range accommodates 23" and 24" displays as well as some displays with screens as small as 22" or as large as 26". If the outside width is less than 21" (53 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5" (62 cm) are not compatible
† Combined weight of displays can be no more than 36 lbs (16.4 kg). This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5" (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5" (64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity
  • Specially designed for use with Interactive Arms (45-296-026 or 45-304-026) but will also attach to other mounts with four-hole interface of 50 x 50 mm, 100 x 100 mm or 200 x 100 mm
  • Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
  • This kit can be installed and used without the included handle
  • Product Dimensions: 4.6"H x 29.1"W x 1.5"D (11.7 x 74 x 38 cm)
 
 Warranty
  • 5 years limited

 

Product Code: 97-718-009


REQUEST further information

Delivery

We use Fastway as our main couriers, therefore we are unable to deliver to PO Boxes (no deliveries on weekends). Our couriers cannot phone prior to delivery, and someone will need to be present to accept the delivery during business hours. If items are in stock (excluding chairs and desks), the delivery times are as follows: Major Metropolitan cities 1-3 business days Rural Areas 3-4 business days Australian chair companies ( Gregory’s range): Quickship chairs are available for dispatch from the factory within 2 business days. Custom made chairs (modified seat, or fabric colours) take between 3-4 weeks for manufacture. Delivery can take up to 15 days (Darwin & Perth). Sydney & Melboure are usually between 2-4 days. Other areas are between these times, but please contact us if you would like a more definite timeframe. Imported chairs (Kinnarps, selected HAG, rh). Please allow up to 8-12 weeks for delivery. Desks: As desks have a wide range of custom options, please contact us for time frames. We require a contact phone number and email address for all deliveries. Once your order has been shipped, we send an e-mail with the tracking information for your order.

Returns

At Ergoport, we strive to provide the most up-to-date information on our products to allow you to make the most informed decision before you make your purchase. However, if you do make an incorrect choice or change your mind, return the product within 7 days of receipt (upon approval only). A 20% restocking fee will apply to approved returns. Unfortunately, we cannot accept products which are not in a resellable condition e.g. products removed from blister packaging or without packaging, products that have been installed (monitor arms, keyboard trays, anti-glare and privacy filters etc). If the product you receive is faulty/dead on arrival or damaged in transit, contact us within 7 days and you will receive either a full refund (including any freight costs) or product exchange (refunds and exchanges are upon approval and only after damaged goods have been inspected). Please note there is no refund or exchange for special order items (unless faulty or damaged on arrival). These include all chairs and complete height adjustable desks. For all enquiries related to returns or exchanges, please e-mail sales@ergoport.com.au. Please keep your invoice for proof of purchase. Please do not send any return/exchange products to Ergoport prior to contacting us for approval.

Shipping

Freight in Australia is based on the heavier weight, either physical weight or volume weight. To calculate freight, simply add the product to cart, and enter the delivery postcode into the relevant field. If no postcode is entered, a default freight charge will appear until entered.

Recently Viewed Products